Putting on and taking off sweaters in our daily lives might result in the production of cracking sounds and sparks. If we vigorously rub our hair during the winter, it will fall out in clumps. Static electricity can be seen here. Today, we at Titanflor will walk you through the process of understanding the classification of anti-static raised floors, as well as the characteristics of anti-static raised floors and the applications of anti-static raised floors. This is because sweaters are made of wool, which can easily crack.
1. An increased ceiling for the OA network Electrostatic spraying of conductive epoxy resin is used to treat the floor's surface, and foamed cement is used to fill the cavity inside the floor. It has a high load capacity, suppresses noise, is resistant to surface wear, and is resistant to moisture. Other names for the OA network anti-static include bare finished ESD Vinyl Floor Tiles and office raised floor. It is made entirely out of steel, and each of its four corners has its own independent support. Foamed cement is used to fill the
3. Calcium sulfate floor
It is beautiful in addition to being kind to the environment, which is why we use them frequently in locations such as banks, data centers, offices, and computer rooms. The non-toxic and unbleached fiber that is used as the reinforcement material in calcium sulfate anti-static raised floor is combined with the solidified calcium sulfate crystals that are made through a process called pulse pressing. It is extremely strong, flame-resistant, and wear-resistant all at the same time.
4. Raised floor that is constructed with a wood core
Chipboard is used as the core material in anti-static raised floors that have a wood core. In addition to being inexpensive, chipboard is incredibly lightweight and resistant to the effects of moisture. These types of floors are frequently used in spaces ranging from small to medium-sized computer rooms.
5. Aluminum Panel
It has high strength, a superior resistance to fire, and the ability to withstand water well. Because the board base has the potential to be recycled, we make extensive use of it in the power industry. Smelting and die-casting the resulting aluminum alloy material results in the production of an anti-static raised floor made of aluminum. It possesses high strength, a superior resistance to fire, and the ability to withstand water well.
6. Variations on the theme of the raised floor
In addition, there are anti-static raised floors that are used for special events, such as anti-static perforated panels, glass raised floors, anti-static PVC floors, and other options that are comparable. These floors are raised above the ground.
After supplying a significant amount of data, it is time for the content factory review. The exporter is required to provide a factory inspection report as part of the SABER certification process. We made the decision to have the factory go through inspection by the TUV agency. You have the option of selecting an on-site factory inspection. After supplying a significant amount of data, it is time for the content factory review. The exporter is required to provide a factory inspection report as part of the SABER certification process.
The process of inspecting the content is also extremely stringent. The sequence of incoming materials, production workshops, and finished product warehouses is nearly identical to the sequence of inspecting a factory. The content audit won't take place until after the materials are almost completely finished. This is a fairly laborious process, but as long as the procedures are followed to the letter, there shouldn't be any issues; in fact, it can be finished in almost an hour. However, the procedure for factory inspection requires that each link be demonstrated individually, and corresponding certificates must also be provided.